|  
CELWAVE REPEATER AND BASE STATION ANTENNAS  
DISTRIBUTED BY  &  WADSWORTH SALES INCORPORATED CALL 1-815-790-4494 (ask for Bryan) E-MAIL >>> wb9mcw@gmail.com
Omnidirectional antennas radiate maximum power uniformly in all directions, in the horizontal plane. These center-fed collinear antennas ensure consistent gain and impedance across the frequency band for a wide variety of applications, including land mobile radio services. CELWAVE has been supplying omni antennas since the early days of radio communication. CELWAVE ANTENNAS are the brand the Professionals use. They have become the "Standard Repeater Antenna" Look around on the towers across the USA and ask the top notch 2-Way Dealers what brand they prefer? The answer will be "CELWAVE" Super StationmasterTM Stationmaster II® Storm Chief TM 
TO SEE ALL OF THE CELWAVE OMNI ANTENNAS CLICK ON >>>MASTER CELWAVE OMNI ANTENNA CHART PDF<<< CLICK ON CLICK ON >>>CELWAVE COMMERCIAL ANTENNAS PDF<<< CLICK ON OR SCROLL DOWN TO THE PHOTOS AND ANTENNAS LISTED BELOW THE "HAM RADIO & GMRS" SECTION IN THE "COMMERCIAL" SECTION EMAIL OR CALL US WITH THE MODEL YOU ARE INTERESTED IN AND WE WILL PRODUCE A QUOTE FOR YOU REMEMBER TO INCLUDE ALL OF YOUR CONTACT INFO FULL NAME~COMPANY{GROUP NAME}~PHONE AND FAX #'s STREET ADDRESS~CITY/STATE+ZIP To E-Mail Click On >>> wb9mcw@gmail.com PHONE # 815-790-4494 IF THE ANTENNA IS IN STOCK 1 WEEK DELIVERY IS POSSIBLE OTHERWISE 2-3 WEEK DELIVERY IS NEEDED TO SEE ALL OF THE CELWAVE OMNI ANTENNAS
PHONE # 815-790-4494 ASK FOR BRYAN WADSWORTH
-- COMMERCIAL SECTION-- SCROLL DOWN PAST THE "HAM RADIO & GMRS" SECTION TO SEE ALL OF THE VHF AND UHF CELWAVE "COMMERCIAL MODELS" AND PDF'S
CLICK ON >>>CELWAVE COMMERCIAL ANTENNAS PDF<<< CLICK ON
--HAM RADIO & GMRS SECTION-- THE ANTENNAS PICKED OUT BELOW ARE THE HIGHEST GAIN AND LARGEST SIZE ANTENNAS CELWAVE OFFERS FOR HAM RADIO & GMRS. 
FOR 2 METER (144-148 MHz) AMATEUR RADIO FM REPEATERS & BASE STATIONS Product Description Super Stationmaster VHF base station antennas incorporate the design features of 9 MHz broadband capability, improved lightning protection and true omnidirectional gain in excess of 5 dBd. Note: Below 150 MHz, rated gain is 4.8 dBd due to length constraints. Side mounting hardware is available for the 220 to achieve special radiation patterns. Features/Benefits • Fiberglass construction protects radiating elements in corrosive environments. • DC grounded – affords lightning protection. • Copper radiating elements minimize possibility of intermod generation. Technical Features | Frequency Band | 25-299.9 MHz | | Horizontal Pattern | OmniDirectional | | Antenna Type | Fiberglass Omni | | Electrical Down Tilt Option | Fixed | | Gain, dBi (dBd) | 7.4 (5.3) | | Frequency Range, MHz | 142-150 | | Connector Type | N Female | | Connector Location | Bottom | | Mount Type | Fixed | | Electrical Downtilt, deg | 0 | | Orientation | Upright | | Mounting Hardware | 46 Clamp Set | | Rated Wind Speed, km/h (mph) | 160 (100) | | Gain (Omni), dBi (dBd) | 7.39 (5.25) | | VSWR | < 1.6:1 | | Vertical Beamwidth, deg | 18 | | Polarization | Vertical | | Maximum Power Input, W | 500 | | Lightning Protection | Direct Ground | | 3rd Order IMP @ 2 x 43 dBm, dBc | -130 | | Impedance, Ohms | 50 | | Overall Length, m (ft) | 5.85 (19.2) | | Element Housing Length, m (ft) | 5.12 (16.8) | | Mounting Pipe Diameter, m (in) | 0.07 (2.75) | | Support Pipe Length, m (ft) | 0.71 (2.33) | | Weight, kg (lb) | 11 (25) | | Radiating Element Material | Copper | | Element Housing Material | Fiberglass | | Support Pipe Material | Aluminum Alloy | | Max Wind Loading Area, m² (ft²) | 0.202 (2.17) | | Survival Wind Speed, km/h (mph) | 200 (125) | | Bend Mom @ Rated Wind 1" Below Top of Mt Pipe, N m (ft lbf) | 1001 (738) | | Wind Load - Side @ Rated Wind, N (lbf) | 387 (87) | | Shipping Weight, kg (lb) | 21.8 (48) | | Packing Dimensions, HxWxD, mm (in) | 6400 x 100 x 100 (251.96 x 3.94 x 3.94) | | Packing Dimensions - HxWxD, m (ft) | 6.4 x 0.1 x 0.1 (21 x 0.33 x 0.33) | | Shipping Dimensions of Accessory - HxWxD, m (ft) | Packed w/antenna | | Shipping Mode | Common Carrier |
CLICK ON >>>220-2N PDF<<< CLICK ON
FOR 70 cm (440-450 MHz) AMATEUR RADIO FM REPEATERS & BASE STATIONS Product Description These Super Stationmaster UHF base station antennas incorporate design enhancements not normally available in other fiberglass collinear antennas of comparable size. Due to their broadband characteristics, only six versions are required to cover the 450-512 MHz band. The 455 combines full 10 MHz bandwidth capability and improved lightning protection with 10 dBd omni-directional gain while preserving the desirable light-weight characteristic found in all Stationmaster antennas. Features/Benefits • Fiberglass construction protects radiating elements in corrosive environments. • Copper radiating elements minimize possibility of intermod generation. • Full 10 dB gain – provides maximum on horizon coverage. Technical Features | Frequency Band | 300-699.9 MHz | | Horizontal Pattern | OmniDirectional | | Antenna Type | Fiberglass Omni | | Electrical Down Tilt Option | Fixed | | Gain, dBi (dBd) | 12.1 (10) | | Frequency Range, MHz | 440-450 | | Connector Type | N Female | | Connector Location | Bottom | | Mount Type | Fixed | | Electrical Downtilt, deg | 0 | | Orientation | Upright | | Mounting Hardware | 46 Clamp Set | | Rated Wind Speed, km/h (mph) | 160 (100) | | Gain (Omni), dBi (dBd) | 12.14 (10) | | VSWR | < 1.5:1 | | Vertical Beamwidth, deg | 7 | | Polarization | Vertical | | Maximum Power Input, W | 500 | | Lightning Protection | Direct Ground | | 3rd Order IMP @ 2 x 43 dBm, dBc | -130 | | Impedance, Ohms | 50 | | Overall Length, m (ft) | 6.16 (20.2) | | Element Housing Length, m (ft) | 5.46 (17.9) | | Mounting Pipe Diameter, m (in) | 0.07 (2.75) | | Support Pipe Length, m (ft) | 0.61 (2) | | Weight, kg (lb) | 11 (24) | | Radiating Element Material | Copper | | Element Housing Material | Fiberglass | | Support Pipe Material | Aluminum Alloy | | Max Wind Loading Area, m² (ft²) | 0.178 (1.92) | | Survival Wind Speed, km/h (mph) | 200 (125) | | Bend Mom @ Rated Wind 1" Below Top of Mt Pipe, N m (ft lbf) | 936 (690) | | Wind Load - Side @ Rated Wind, N (lbf) | 342 (77) | | Shipping Weight, kg (lb) | 25.9 (57) | | Packing Dimensions, HxWxD, mm (in) | 7320 x 100 x 100 (288.18 x 3.94 x 3.94) | | Packing Dimensions - HxWxD, m (ft) | 7.32 x 0.1 x 0.1 (24 x 0.33 x 0.33) | | Shipping Dimensions of Accessory - HxWxD, m (ft) | Packed w/antenna | | Shipping Mode | Common Carrier |
CLICK ON >>>455-5N PDF<<< CLICK ON
FOR 70 cm (440-450 MHz) AMATEUR RADIO FM REPEATERS & BASE STATIONS SMALLER ALTERNATE LESS $$ ANTENNA Product Description 
1151 SeriesFeatures/Benefits • Weatherproof design assures system reliability, withstands winds of 125 mph. • Copper elements minimize possibility of intermod generation. • DC grounded – protects against damage from lightning strikes. Technical Features | Frequency Band | 300-699.9 MHz | | Horizontal Pattern | OmniDirectional | | Antenna Type | Fiberglass Omni | | Electrical Down Tilt Option | Fixed | | Gain, dBi (dBd) | 10.1 (8) | | Frequency Range, MHz | 440-450 | | Connector Type | N Female | | Connector Location | Bottom | | Mount Type | Fixed | | Electrical Downtilt, deg | 0 | | Orientation | Upright | | Mounting Hardware | 46 Clamp Set | | Rated Wind Speed, km/h (mph) | 200 (125) | | Gain (Omni), dBi (dBd) | 10.14 (8) | | VSWR | < 1.5:1 | | Vertical Beamwidth, deg | 12 | | Polarization | Vertical | | Maximum Power Input, W | 250 | | Lightning Protection | Direct Ground | | 3rd Order IMP @ 2 x 43 dBm, dBc | -130 | | Impedance, Ohms | 50 | | Overall Length, m (ft) | 4.72 (15.5) | | Element Housing Length, m (ft) | 4.11 (13.5) | | Mounting Pipe Diameter, m (in) | 0.07 (2.75) | | Support Pipe Length, m (ft) | 0.61 (2) | | Weight, kg (lb) | 8 (17) | | Radiating Element Material | Copper | | Element Housing Material | Fiberglass | | Support Pipe Material | Aluminum Alloy | | Max Wind Loading Area, m² (ft²) | 0.16 (1.72) | | Bend Mom @ Rated Wind 1" Below Top of Mt Pipe, N m (ft lbf) | 637 (470) | | Wind Load - Side @ Rated Wind, N (lbf) | 307 (69) | | Shipping Weight, kg (lb) | 21.8 (48) | | Packing Dimensions, HxWxD, mm (in) | 5270 x 100 x 100 (207.47 x 3.94 x 3.94) | | Packing Dimensions - HxWxD, m (ft) | 5.27 x 0.1 x 0.1 (17.3 x 0.33 x 0.33) | | Shipping Dimensions of Accessory - HxWxD, m (ft) | Packed w/antenna | | Shipping Mode | Common Carrier |
 
Vertical Pattern Horizontal Pattern
CLICK ON >>>1151-2N PDF<<< CLICK ON
FOR 1.25 METER (220-225 MHz) AMATEUR RADIO FM REPEATERS & BASE STATIONS Product Description Super Stationmaster VHF base station antennas incorporate the design features of 9 MHz broadband capability, improved lightning protection and true omnidirectional gain in excess of 5 dBd. Note: Below 150 MHz, rated gain is 4.8 dBd due to length constraints. Side mounting hardware is available for the 220 to achieve special radiation patterns. Features/Benefits • Fiberglass construction protects radiating elements in corrosive environments. • DC grounded – affords lightning protection. • Copper radiating elements minimize possibility of intermod generation. Technical Features | Frequency Band | 25-299.9 MHz | | Horizontal Pattern | OmniDirectional | | Antenna Type | Fiberglass Omni | | Electrical Down Tilt Option | Fixed | | Gain, dBi (dBd) | 8.1 (6) | | Frequency Range, MHz | 220-225 | | Connector Type | N Female | | Connector Location | Bottom | | Mount Type | Fixed | | Electrical Downtilt, deg | 0 | | Orientation | Upright | | Mounting Hardware | 46 Clamp Set | | Rated Wind Speed, km/h (mph) | 160 (100) | | Gain (Omni), dBi (dBd) | 8.14 (6) | | VSWR | < 1.6:1 | | Vertical Beamwidth, deg | 16 | | Polarization | Vertical | | Maximum Power Input, W | 500 | | Lightning Protection | Direct Ground | | 3rd Order IMP @ 2 x 43 dBm, dBc | -130 | | Impedance, Ohms | 50 | | Overall Length, m (ft) | 5.73 (18.8) | | Element Housing Length, m (ft) | 5.06 (16.6) | | Mounting Pipe Diameter, m (in) | 0.07 (2.75) | | Support Pipe Length, m (ft) | 0.69 (2.25) | | Weight, kg (lb) | 10 (21) | | Radiating Element Material | Copper | | Element Housing Material | Fiberglass | | Support Pipe Material | Aluminum Alloy | | Max Wind Loading Area, m² (ft²) | 0.164 (1.77) | | Survival Wind Speed, km/h (mph) | 200 (125) | | Bend Mom @ Rated Wind 1" Below Top of Mt Pipe, N m (ft lbf) | 807 (595) | | Wind Load - Side @ Rated Wind, N (lbf) | 316 (71) | | Shipping Weight, kg (lb) | 25.9 (57) | | Packing Dimensions, HxWxD, mm (in) | 6400 x 100 x 100 (251.96 x 3.94 x 3.94) | | Packing Dimensions - HxWxD, m (ft) | 6.4 x 0.1 x 0.1 (21 x 0.33 x 0.33) | | Shipping Dimensions of Accessory - HxWxD, m (ft) | Packed w/antenna | | Shipping Mode | Common Carrier |
CLICK ON >>>220-8BN PDF<<< CLICK ON
FOR 10 METER (25-30 MHz) AMATEUR RADIO FM REPEATERS & BASE STATIONS Product Description
1142 Series
The 1142 is a narrow band unity gain antenna built to a specific spot frequency requirement to effectively reduce interference from other near frequency transmitters. Of rugged, two-piece construction, the antenna's lower section is enclosed in heavy-wall fiberglass tubing. The upper whip is fiberglass and attaches in the field with a protected 1/2" x 20 threaded connector. This unit provides the advantages of DC ground lightning protection, versatility, installation ease and requires no ground plane elements to decouple from the support structure.Features/Benefits • Rugged construction assures system reliability. • High selectivity limits interference from nearby systems. Technical Features | Frequency Band | 25-299.9 MHz | | Horizontal Pattern | OmniDirectional | | Antenna Type | Fiberglass Omni | | Electrical Down Tilt Option | Fixed | | Gain, dBi (dBd) | 2.1 (0) | | Frequency Range, MHz | 25-30 | | Connector Type | N Female | | Connector Location | Bottom | | Mount Type | Fixed | | Electrical Downtilt, deg | 0 | | Mounting Hardware | 46 Clamp Set | | Rated Wind Speed, km/h (mph) | 160 (100) | | Gain (Omni), dBi (dBd) | 2.14 (0) | | VSWR | < 1.5:1 | | Vertical Beamwidth, deg | 75 | | Polarization | Vertical | | Maximum Power Input, W | 250 | | Lightning Protection | Direct Ground | | Impedance, Ohms | 50 | | Overall Length, m (ft) | 5.73 (18.8) | | Element Housing Length, m (ft) | 5.43 (17.8) | | Mounting Pipe Diameter, m (in) | 0.04 (1.66) | | Support Pipe Length, m (ft) | 0.3 (1) | | Weight, kg (lb) | 5 (10) | | Radiating Element Material | Copper Alloy | | Element Housing Material | Fiberglass | | Support Pipe Material | 6061 - T6 Aluminum | | Max Wind Loading Area, m² (ft²) | 0.086 (0.93) | | Survival Wind Speed, km/h (mph) | 200 (125) | | Bend Mom @ Rated Wind 1" Below Top of Mt Pipe, N m (ft lbf) | 450 (332) | | Wind Load - Side @ Rated Wind, N (lbf) | 165 (37) | | Shipping Weight, kg (lb) | 10.9 (24) | | Packing Dimensions, HxWxD, mm (in) | 3690 x 100 x 100 (145.27 x 3.94 x 3.94) | | Packing Dimensions - HxWxD, m (ft) | 3.69 x 0.1 x 0.1 (12.1 x 0.33 x 0.33) | | Shipping Dimensions of Accessory - HxWxD, m (ft) | 0.5 x 0.10 x 0.10 (1.8 x 0.33 x 0.33) | | Shipping Mode | Common Carrier/UPS |
FOR 6 METER (42-54 MHz) AMATEUR RADIO FM REPEATERS & BASE STATIONS Product Description
1142 Series
The 1142 is a narrow band unity gain antenna built to a specific spot frequency requirement to effectively reduce interference from other near frequency transmitters. Of rugged, two-piece construction, the antenna's lower section is enclosed in heavy-wall fiberglass tubing. The upper whip is fiberglass and attaches in the field with a protected 1/2" x 20 threaded connector. This unit provides the advantages of DC ground lightning protection, versatility, installation ease and requires no ground plane elements to decouple from the support structure.Features/Benefits • Rugged construction assures system reliability. • High selectivity limits interference from nearby systems. Technical Features | Frequency Band | 25-299.9 MHz | | Horizontal Pattern | OmniDirectional | | Antenna Type | Fiberglass Omni | | Electrical Down Tilt Option | Fixed | | Gain, dBi (dBd) | 2.1 (0) | | Frequency Range, MHz | 42-54 | | Connector Type | N Female | | Connector Location | Bottom | | Mount Type | Fixed | | Electrical Downtilt, deg | 0 | | Mounting Hardware | 46 Clamp Set | | Rated Wind Speed, km/h (mph) | 160 (100) | | Gain (Omni), dBi (dBd) | 2.14 (0) | | VSWR | < 1.5:1 | | Vertical Beamwidth, deg | 75 | | Polarization | Vertical | | Maximum Power Input, W | 250 | | Lightning Protection | Direct Ground | | Impedance, Ohms | 50 | | Overall Length, m (ft) | 3.84 (12.6) | | Element Housing Length, m (ft) | 3.54 (11.6) | | Mounting Pipe Diameter, m (in) | 0.04 (1.66) | | Support Pipe Length, m (ft) | 0.3 (1) | | Radiating Element Material | Copper Alloy | | Element Housing Material | Fiberglass | | Support Pipe Material | 6061 - T6 Aluminum | | Max Wind Loading Area, m² (ft²) | 0.063 (0.68) | | Survival Wind Speed, km/h (mph) | 200 (125) | | Bend Mom @ Rated Wind 1" Below Top of Mt Pipe, N m (ft lbf) | 216 (159) | | Wind Load - Side @ Rated Wind, N (lbf) | 120 (27) | | Shipping Weight, kg (lb) | 10.9 (24) | | Packing Dimensions, HxWxD, mm (in) | 2320 x 100 x 100 (91.33 x 3.94 x 3.94) | | Packing Dimensions - HxWxD, m (ft) | 2.32 x 0.1 x 0.1 (7.6 x 0.33 x 0.33) | | Shipping Dimensions of Accessory - HxWxD, m (ft) | 0.5 x 0.10 x 0.10 (1.8 x 0.33 x 0.33) | | Shipping Mode | UPS |
FOR "GMRS" General Mobile Radio Service (460-470 MHz) FM REPEATERS AND BASE STATIONS Product Description These Super Stationmaster UHF base station antennas incorporate design enhancements not normally available in other fiberglass collinear antennas of comparable size. Due to their broadband characteristics, only six versions are required to cover the 450-512 MHz band. The 455 combines full 10 MHz bandwidth capability and improved lightning protection with 10 dBd omni-directional gain while preserving the desirable light-weight characteristic found in all Stationmaster antennas. Features/Benefits • Fiberglass construction protects radiating elements in corrosive environments. • Copper radiating elements minimize possibility of intermod generation. • Full 10 dB gain – provides maximum on horizon coverage. Technical Features | Frequency Band | 300-699.9 MHz | | Horizontal Pattern | OmniDirectional | | Antenna Type | Fiberglass Omni | | Electrical Down Tilt Option | Fixed | | Gain, dBi (dBd) | 12.1 (10) | | Frequency Range, MHz | 460-470 | | Connector Type | N Female | | Connector Location | Bottom | | Mount Type | Fixed | | Electrical Downtilt, deg | 0 | | Orientation | Upright | | Mounting Hardware | 46 Clamp Set | | Rated Wind Speed, km/h (mph) | 160 (100) | | Gain (Omni), dBi (dBd) | 12.14 (10) | | VSWR | < 1.5:1 | | Vertical Beamwidth, deg | 7 | | Polarization | Vertical | | Maximum Power Input, W | 500 | | Lightning Protection | Direct Ground | | 3rd Order IMP @ 2 x 43 dBm, dBc | -130 | | Impedance, Ohms | 50 | | Overall Length, m (ft) | 5.94 (19.5) | | Element Housing Length, m (ft) | 5.3 (17.4) | | Mounting Pipe Diameter, m (in) | 0.07 (2.75) | | Support Pipe Length, m (ft) | 0.61 (2) | | Weight, kg (lb) | 11 (24) | | Radiating Element Material | Copper | | Element Housing Material | Fiberglass | | Support Pipe Material | Aluminum Alloy | | Max Wind Loading Area, m² (ft²) | 0.174 (1.87) | | Survival Wind Speed, km/h (mph) | 200 (125) | | Bend Mom @ Rated Wind 1" Below Top of Mt Pipe, N m (ft lbf) | 884 (652) | | Wind Load - Side @ Rated Wind, N (lbf) | 333 (75) | | Shipping Weight, kg (lb) | 21.8 (48) | | Packing Dimensions, HxWxD, mm (in) | 7320 x 100 x 100 (288.18 x 3.94 x 3.94) | | Packing Dimensions - HxWxD, m (ft) | 7.32 x 0.1 x 0.1 (24 x 0.33 x 0.33) | | Shipping Dimensions of Accessory - HxWxD, m (ft) | Packed w/antenna | | Shipping Mode | Common Carrier |
CLICK ON >>>455-7N PDF<<< CLICK ON
FOR "GMRS" General Mobile Radio Service (460-470 MHz) FM REPEATERS AND BASE STATIONS ALTERNATE LESS $$ & SMALLER ANTENNA Product Description
1151 SeriesFeatures/Benefits • Weatherproof design assures system reliability, withstands winds of 125 mph. • Copper elements minimize possibility of intermod generation. • DC grounded – protects against damage from lightning strikes. Technical Features | Frequency Band | 300-699.9 MHz | | Horizontal Pattern | OmniDirectional | | Antenna Type | Fiberglass Omni | | Electrical Down Tilt Option | Fixed | | Gain, dBi (dBd) | 10.1 (8) | | Frequency Range, MHz | 460-470 | | Connector Type | N Female | | Connector Location | Bottom | | Mount Type | Fixed | | Electrical Downtilt, deg | 0 | | Orientation | Upright | | Mounting Hardware | 46 Clamp Set | | Rated Wind Speed, km/h (mph) | 200 (125) | | Gain (Omni), dBi (dBd) | 10.14 (8) | | VSWR | < 1.5:1 | | Vertical Beamwidth, deg | 12 | | Polarization | Vertical | | Maximum Power Input, W | 250 | | Lightning Protection | Direct Ground | | 3rd Order IMP @ 2 x 43 dBm, dBc | -130 | | Impedance, Ohms | 50 | | Overall Length, m (ft) | 4.54 (14.9) | | Element Housing Length, m (ft) | 3.96 (13) | | Mounting Pipe Diameter, m (in) | 0.07 (2.75) | | Support Pipe Length, m (ft) | 0.61 (2) | | Weight, kg (lb) | 7 (16) | | Radiating Element Material | Copper | | Element Housing Material | Fiberglass | | Support Pipe Material | Aluminum Alloy | | Max Wind Loading Area, m² (ft²) | 0.155 (1.67) | | Bend Mom @ Rated Wind 1" Below Top of Mt Pipe, N m (ft lbf) | 594 (438) | | Wind Load - Side @ Rated Wind, N (lbf) | 298 (67) | | Shipping Weight, kg (lb) | 21.8 (48) | | Packing Dimensions, HxWxD, mm (in) | 5120 x 100 x 100 (201.57 x 3.94 x 3.94) | | Packing Dimensions - HxWxD, m (ft) | 5.12 x 0.1 x 0.1 (16.8 x 0.33 x 0.33) | | Shipping Dimensions of Accessory - HxWxD, m (ft) | Packed w/antenna | | Shipping Mode | Common Carrier |
Vertical Pattern Horizontal Pattern
CLICK ON >>>1151-4N PDF<<< CLICK ON
NOTE: THE 620 SERIES IS DISCONTINUED >>> USE THE 220 SERIES
-- COMMERCIAL SECTION-- --VHF "OMNI" ANTENNAS CLICK ON >>>MASTER CELWAVE OMNI ANTENNA CHART PDF<<< CLICK ON NOTE: THE PD200 & PD620 SERIES ARE DISCONTINUED >>> USE THE 220 SERIES CLICK ON >>>CELWAVE COMMERCIAL ANTENNAS PDF<<< CLICK ON 
CELWAVE BA1010 
CELWAVE BA1012  
CELWAVE BA1312
CELWAVE PD220 
CELWAVE PD1142 
CELWAVE PD1167 --UHF "OMNI" ANTENNAS-- CLICK ON >>>MASTER CELWAVE OMNI ANTENNA CHART PDF<<< CLICK ON CLICK ON >>>CELWAVE COMMERCIAL ANTENNAS PDF<<< CLICK ON 
CELWAVE BA6012 & BA6312 
CELWAVE BA6110 
CELWAVE PD201 
CELWAVE PD455 
CELWAVE PD458 
CELWAVE PD1151 IF YOU DID NOT SEE YOUR OMNI IN THE ABOVE PHOTOS IT JUST MAY HAVE NOT BEEN SHOWN CHECK ON THE MASTER OMNI CHART CLICK ON >>> MASTER CELWAVE OMNI ANTENNA CHART PDF<<< CLICK ON CLICK ON >>>CELWAVE COMMERCIAL ANTENNAS PDF<<< CLICK ON  NOTE: THE 620 SERIES IS DISCONTINUED >>> USE THE 220 SERIES CLICK ON >>>CELWAVE COMMERCIAL ANTENNAS PDF<<< CLICK ON CALL 1-815-790-4494 OR EMAIL >>> wb9mcw@gmail.com FOR PRICING ON CELWAVE ANTENNAS FOR COMMERCIAL APPLICATIONS
Super StationmasterTM Stationmaster II® Storm Chief TM PHOTO GALLERY
 | Antenna Tower is 120-ft. tall Free Standing (1) UHF Folded Dipole Array (2) UHF Control Yagis (3) Super Station Master VHF Verts. (2) Super Station Master UHF Verts (2) Misc. VHF Verts. (1) DB products Folded Dipole LB Antenna Telephone Pole 30-Feet (1) VHF Super Station Master (1) 800-MHz Vert. W4FOT |
wI0OK/r Glen Arbor - Empire Michigan Below you can see the 450 Mhz Cellwave Super Stationmaster antenna at the outer end of the mount. This is presently hooked up to 449.725 receiver #3 and also is used to receive the Traverse City link signal, and is also connected to the UHF control receiver. What is particularly good about this antenna, even though it's only at 100' on the tower, is that it's orientation is somewhat different giving it the ability to fill in for a bad UHF tower shadow in nearby downtown Glen Arbor. HT coverage at the local watering holes is still possible. On the left, just inside the UHF Super Stationmaster, is a dualband Diamond X50A modified for inverted mounting and connected to the 2meter and UHF packet systems. |
Stark County Amateur Radio Emergency Service The installation of the new Station Master Antenna 
Dave lifts the new antenna from the main roof to the penthouse roof about 125 feet above the ground. The temporary antenna is seen on the left. 
Dave & Terry begin removing the temporary antenna from the mounting pipe. 
The old antenna is down and the mounting bracket is being adjusted for the new repeater antenna. Do these look like a couple of happy guys or what ! 
The new Station Master antenna is SLOWLY set into position into the mounting bracket. Thank goodness it wasn't a windy day !
AA2C (on the right) returning a favor to WD2E on his repeater tower, 60' up on top of a Tennessee mountain, 1,500' above sea level. Like the song says, "the mountain is high and the valley is low" -- VERY LOW FROM UP THERE! We installed a 440 MHz Stationmaster. I must admit, I wasn't unhappy to climb down.
Cellwave Super Stationmaster antenna 
Joel - WA1ZYX at the base of the new Super StationMaster. Feedline hasn't even been connected yet, but it's up there!! 
And there it is... The new Super StationMaster. A little bigger than the original one. Picture from a little further away. 
Site from the parking lot next to RT101
Saguaro Amateur Remote Base Association The finished product... On the left of our side-arm mount, a Celwave™ PD-440 (VHF 3 DBd gain) dual open dipole for the 2 meter remote base. On the right, the PD458 "Storm Chief"™ (UHF 8 DBd gain) fiberglass omni for the 440 repeater.
& REPEATER AND BASE STATION ANTENNAS DISTRIBUTED BY & WADSWORTH SALES INCORPORATED CALL 1-815-790-4494 (ask for Bryan) E-MAIL >>> wb9mcw@gmail.com MAYBE YOU WOULD LIKE TO BECOME A "WADSWORTH SALES" DEALER? MANY OF OUR DEALERS WORK FULL TIME JOBS AND DO THE RADIO BUSINESS AS A "SIDE BUSINESS". WE HAVE MANY HAM CLUBS, ESDA/RACES/ARES ORGANIZATIONS, GMRS AND COMMERCIAL 2-WAY DEALERS AS WELL. IF YOU THINK YOU MIGHT LIKE TO INVESTIGATE THIS VENTURE JUST E-MAIL OR GIVE US A CALL! BEING A MANUFACTURER'S REPRESENTATIVE WE PROCESS NO ORDERS DIRECTLY BUT INSTEAD SET UP DEALERS AND DIRECT END USERS TO OUR MASTER DISTRIBUTOR | |